Alexor PC9155D-433 Guía de instalación descargar pdf (Pagina 8)

PC9155 Wireless Alarm System

1-3

Entering Letters

Some commands require the entry of letters (i.e., A, B, C, D, E, F).

To enter a letter, press and the number on the keypad that corresponds to the appropriate letter, as indicated below.

1 = A 4 = D

2 = B 5 = E

3 = C 6 = F

The cursor will blink to indicate that you are entering letters. To revert back to numeric entry press .

Incorrect Data Entries:

To change a data entry before it has been accepted by the alarm system, use the scroll keys to reposition the cursor then re-enter the digit. If the

data has already been accepted by the system, press [#] to exit the section then re-enter the programming section and enter the data again.

If you incorrectly enter 0001 in Step 2 of Program alarm system in Template Programming, you must either reset the alarm system to its default

values (section. [996], re-enroll all wireless devices and re-program the system) or re-enter the correct data in Installer Programming [][8].

Special Keys:

Scroll symbols < > on the display indicate that there are options you can view by pressing the keys. These scroll keys can also be

used to position the cursor.

The key is similar in function to the ‘ENTER’ key on a personal computer. It is generally used to accept the existing programming option.

It is also the first key entry for [] commands and can be used to enter the letters A-F when in Installer Programming mode.

The key functions similarly to the ‘ESCAPE’ key on a personal computer. It is generally used to exit the current programming section or to

return to the previous menu.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 87 88

Sin comentarios

Alexor PC9155D-433 Guía de instalación Pagina 8