Alexor PC9155D-433 Especificaciones descargar pdf (Pagina 36)

Enrolling wireless key FOBs (1-way and 2-way)

Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898])

- the display will read ‘Wireless Enrollment Mode’

Step 2 – Press a button on the FOB to be enrolled

- the display will indicate the FOB

Step 3 – Press [*] to confirm the correct device

Step 4 – Enter the 2-digit slot number of the FOB ([01] – [16])

Notes:

- if the display does not indicate the serial number of the desired detector to be enrolled, press [#] and

repeat Step 2

- if the slot number entered in Step 4 is already occupied with a different serial number, the keypad will

prompt to enter [*] to replace with the new serial number or [#] to keep the previous device and return to the

slot number entry screen

- the default programming for the key FOBs are as follows:

Button 1 = Stay

Button 2 = Away

Button 3 = Disarm

Button 4 = Panic

Button 5 = Command Output#1

Button 6 = Command Output#2*

*WT4989 Only

To change, enter Sections [804], Sub-Section [141 – 156]

Enrolling Prox Tags (WT5500P Only)

Step 1 – Enter Access Code Programming ([*][5] + [Master or Supervisory Code])

Step 2 – Select a user code number (01 -16, 40)to be associated with the prox tag

Step 3 – If no code is programmed for the user, enter a 4 or 6-digit number. If a 4 or 6-digit number

already exist, scroll through the code number

Step 4 – The keypad will prompt to present the prox tag. The message ‘Tag Accepted’ will be

display if correctly enrolled

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 49 50

Sin comentarios

Alexor PC9155D-433 Especificaciones Pagina 36